|
Standard Specifications
For CrystalLine Frameless By-Pass
Units shall be CrystalLine By-Pass tub or
shower enclosures, as manufactured by Southeastern Aluminum
Products, Inc., Jacksonville, FL.
Materials
Structural metal, brackets, pulls, and
sleeves shall be extruded aluminum – 6463 alloy, T-6
temper-bright dip anodized with polished finish or powder
coated. Glass shall be 3/16" or 1/4" Safety Tempered Glass
with no-shiner edgework to meet or exceed ANSI 97.1–2004
and/or CPSC 16CFR–1201-III requirements. Towel bars shall be
clear extruded acrylic.
Construction
Each enclosure panel shall have two
extruded aluminum hangers – 6463 alloy, T-6 temper-bright dip
anodized finish. Hangers are factory installed on glazed
units. For KD unites, hangers are customer installed per
specifications outlined in installation instructions, each
to the glass. An allen wrench is provided. Each hanger also
has a suspension roller with encased ball bearings and five
individual adjustment settings. Sill track shall have a
strip of extruded vinyl for proper glass position and smooth
operation. Towel bar bracket assembly shall include one
towel bar, two brackets, two sleeves, two plastic inserts
and two rubber bracket/pull pads. Pull assembly shall
include one pull and one rubber bracket pull/pad.
Installation
Installation shall be made according to
Manufacturer’s instructions and drawings included with each
unit. Headers and sill tracks shall be shipped extra length
to allow exact cutting at time of installation.
Limited Warranty
Southeastern Aluminum's products are
guaranteed for a period of one year from date of purchase
against defects in material or workmanship. This warranty is
limited to repair or replacement of defective units at the
option of Southeastern Aluminum Products, Inc. This warranty
is void if the unit shows any signs of physical abuse or
neglect or there is evidence of improper installation.
Southeastern Aluminum Products, Inc. is not responsible for
any damages or injury to persons or property except for
replacement or repair of defective units.
|
